挖掘装载机
SHANMON388
了解参数详情点击咨询厂家
咨询厂家整机操作重量 Overall Operating Weight |
8200KG |
轮边减速型式 Final Reducer |
一级轮边减速 Single Stage Final Reducer |
|
运输尺寸Transport Dimension |
额定桥载荷 Rated Loader of Axle |
8/18.5t |
||
长×宽×高mm L*W*H |
6120×2410×3763 |
|
|
|
驾驶室到地面高度 cab to ground mm |
2900mm |
传动系统Transmission System |
||
轴距 Wheel base |
2248mm |
变矩器Torque Converter |
||
最小离地间隙 Min. Ground Clearance |
300mm |
型号Model |
YJ280 |
|
装载斗容 Bucket Capacity |
1.0m3 |
型式Type |
单级、单相三元件 Single-stage Three Elements |
|
掘起力 Breakout Force |
38KN |
最高效率 Max. Efficiency |
84.4% |
|
装载举升能力 Loading Lifting Capacity |
2500KG |
变速箱Gearbox |
||
铲斗卸载高度 Bucket Dumping Height |
2742mm |
型式Type |
定轴式动力换档 Fixed Shaft Power Transmission |
|
铲斗卸载距离 Bucket Dumping Distance |
925mm |
离合器操纵油压 Oil Pressure of Clutch |
1373Kpa—1569 Kpa |
|
铲挖深度 Digging Depth |
52mm |
档位数Gears |
前进4档，后退4档 Four forward, four backward |
|
反铲斗容 Backhoe Capacity |
0.3 m3 |
最高车速Max.Speed |
38Km/h |
|
最大挖掘深度 Max. Digging Depth |
3967 /3424mm |
轮胎Tyre |
||
挖斗回转角 Swing Angle of Excavator Grab |
190° |
规格Model |
14-17.5/19.5L-24 |
|
最大牵引力 Max. Pulling Force |
39KN |
前轮气压 Pressure of Front wheel |
0.4Mpa |
|
发动机Engine |
后轮气压 Pressure of Back Wheel |
0.3Mpa |
||
型号Model |
YCD4M22T-105 |
制动系统Brake System |
||
型式Type |
直列、直喷、四冲程、直喷燃烧室 In Line Direct injection Four-Stroke and Injection Combustion Chamber |
驻车/紧急制动 Emergency Brake |
操纵力实施制动 Operation Power Implementing brake |
|
气缸数-内径*行程 Cylinder-Inside Diameter*Stroke |
4 |
手操纵力解除制动 Manual Operation Power Terminating Brake |
||
额定功率Rated Power |
77.3KW |
行车制动 Service Brake |
气顶油钳盘制动 Air Over Oil Caliper Brake |
|
额定转速Rated Speed |
|
外置式 External Type |
||
最低燃油率 Min. Fuel Consumption |
|
自调节 Self-regulation |
||
最大扭矩Max.Torque |
330（N.M）/1600-1700 r/min |
自平衡 Self-balance |
||
排量Displacement |
|
液压系统Hydraulic System |
||
转向系统Steering System |
挖斗挖掘力 Digging Power of Excavator Grab |
46.5KN |
||
转向器型号 Model of Steering Device |
BZZ5-250 |
斗杆挖掘力 Digging Power of Dipper |
44KN |
|
转向角 Steering Angle |
±36 o |
铲斗提升时间 Bucket Lifting Time |
6．8S |
|
最小转弯半径 Min. turning radius |
6581mm |
铲斗下降时间 Bucket Lowering Time |
3.1S |
|
系统压力 Pressure of the system |
20Mpa |
铲斗卸载时间 Bucket Discharge Time |
2.0S |
|
驱动桥Axle |
|
|
||
生产厂家Manufacturer |
肥城Feicheng |
主传动型式 Main Transmission Type |
双级减速式Double Reduction |
|
